Odif OdiCoat-Water/UV/Stain Resistant Gel- 250ml

Janome Blue Plastic Bobbins - 25 Pack In Case

These bobbins fit these Janome machines (except the 1600 series and the MB-4): RE1306, JR1012, 709, 721, 725S, MW3018LE, MS5027LE, DC1030, DC2050, DC2150, DC2200, 740DC, 780DC, DC6050, DC6030, DM7200, 4120QDC, 4300QDC, SKYLINE S3, SKYLINE S6, SKYLINE S7, MC6700P, MC8200QC, MC9450QCP, CM7P, MC400E, MC500E, MC550E, MC9850, SKYLINE S9, MC15000.

Replace any bobbin that is worn, cracked or nicked: a damaged bobbin can cause sewing problems.

If your Janome machine is not included in the above list please contact us and we will let you know if this foot will work with your machine.

The Side Cutter Attachment trims fabric while you sew a seam. Sew seams and seam finishes simultaneously. Side Cutter gives garments a professional finish. Just use the ZigZag or Overedge Stitch to complete your look!

For use with low-shank sewing machines, including brands Singer, Brother, Janome & Elna.

Will work on machines with a stitch width of 7mm.

Please note * this foot is great for sewing straight and is not recommend for curves.

The Rolled Hem Foot, sometimes also known as the narrow hem foot, is used to sew a very narrow hem. The foot folds the raw edge of your fabric under just before it passes under the needle. For garment, home decor or any type of sewing, the rolled hem foot provides a professional looking finish.

Fits: Singer Low Shank Machines such as the following models: 2250, 3221, 4411, 4423, 4432, 8768, 9100, 9960, Featherweight C240

If your Singer machine is not included in the above list, please contact us and we will let you know if this foot will work with your machine.

The Universal Teflon (non-stick) foot is used to sew fabrics such as leather, plastic, vinyl and oilcloth. The slick surface on the Non-Stick Foot’s underside allows for effortless glide on those tricky fabrics. Set the sewing machine to a medium-long straight stitch for best results. For use with low-shank sewing machines.

Fits: Singer Low Shank Machines such as the following models: 2250, 3221, 4411, 4423, 4432, 8768, 9100, 9960

Universal Invisible / Concealed Zipper Foot

Fits most Brother and Singer machines made in the last 20 years.

If you are unsure if this foot will fit you machine please contact us and we will let you know.

This Universal Piping foot has two groves on base of foot to guide piping cord between fabric and is ideal for edge decoration on bags, cushions, soft furnishings etc.

Fits: Singer Low Shank Machines such as the following models: 2250, 3221, 4411, 4423, 4432, 8768, 9100, 9960

If your Singer machine is not included in the above list, please contact us and we will let you know if this foot will work with your machine.

The design of this Universal Straight Stitch Foot improves contact with the feed dogs resulting in more accurate and consistent feed which creates a higher quality straight stitch. Also used for straight stitch applications using fine or lighter weight fabrics where a wide center foot opening might cause the fabric to be pulled into the bobbin area.

Fits: Singer Low Shank Machines such as the following models: 2250, 3221, 4411, 4423, 4432, 8768, 9100, 9960

The Overcasting Edge Foot will give you a similar finish to that of an Over locker. It takes the stitches over the edge of the fabric with the small bar in the center of the foot which wraps the thread around the edge of the fabric as you sew.
Your machine may have some overcasting stitches already. Consult your machine manual for which stitches are for overcasting. Or alternatively you can use a zig zag stitch. When using a Zig Zag stitch make sure that the needle does not hit the bar in the center.


Fits: Singer Low Shank Machines such as the following models: 2250, 3221, 4411, 4423, 4432, 8768, 9100, 9960, Featherweight C240

The Gathering Foot is used to form soft gathers in fabric. You can gather a singer layer of fabric, or you can join a gathered fabric to a second, flat fabric, or you can join a gathered fabric to a second, flat fabric simultaneously. The Gathering Foot works best with softer, lightweight fabrics. For gathering light to medium fabrics, a ruffler attachment is recommended.

Fits: Singer Low Shank Machines such as the following models: 2250, 3221, 4411, 4423, 4432, 8768, 9100, 9960, Featherweight C240

If your Singer machine is not included in the above list, please contact us and we will let you know if this foot will work with your machine.

The Darning & Embroidery Foot can be used for free-motion quilting, thread painting, monograms, and even for repairing torn areas.This foot is one of the most versatile sewing accessories in your sewing room.

TIP: To create texture try free-motion sewing. To set up free motion sewing, cover (or lower) the feed dogs with the Darning Plate from the accessory compartment. Remove the presser foot and shank, then attach the Darning/Embroidery Foot. Select a straight stitch and begin making circular motions on the fabric until it is completely filled in. Do not worry if the stitches are not uniform. Cross the thread lines and just have fun filling in the space. Remember that once the feed dogs are covered (or lowered) you control where the fabric goes and at what rate of speed. Try practicing on a scrap of fabric to get more comfortable!

Fits: Singer Low Shank Machines such as the following models: 2250, 3221, 4411, 4423, 4432, 8768, 9100, 9960, Featherweight C240

On most sewing machine models, the Zipper Foot can be attached to the presser foot holder on either the right or left side. Depending on the type of zipper insertion, both sides may be used. For more information on the Zipper Foot for your machine model, refer to your sewing machine manual.

There are many zipper applications: lapped zipper, fly front zipper, and centered zipper.

Fits: Singer Low Shank Machines such as the following models: 2250, 3221, 4411, 4423, 4432, 8768, 9100, 9960, Featherweight C240

If your Singer machine is not included in the above list, please contact us and we will let you know if this foot will work with your machine.

The Roller Foot can be used in place of an General Purpose Foot with the added benefit of allowing thicker fabrics, napped fabrics, heavy knits, leather, vinyl, or any heavier weight fabrics that are difficult to feed to pass under the foot easily.

Fits: Singer Low Shank Machines such as the following models: 2250, 3221, 4411, 4423, 4432, 8768, 9100, 9960, Featherweight C240,