Janome Blue Tip Needle Designed specifically for your Janome machine. The blue tip needle, a Janome exclusive, is a size #11 and is our best 'all purpose' needle for both both machine embroidery and general sewing on most types of fabrics. The needles special feature is an oversize eye to accomodate the embroidery thread. It reduces stress and tension on the top thread and makes threading easier. Slight Ball point tip.
Machine needle use: machine embroidery and general sewing Needle System: 15x1 Needle size: 75/11
The Darning Foot is used to both mend over holes and tears, and to perform decorative stitching by way of Free Motion. Attach the darning foot to the presser bar with the lever positioned over the needle clamp screw. Drop your machine’s feed dogs, or if not an available function, use a darning plate to disable them. Place fabric, ideally secured into an embroidery hoop. Lower the foot and sew at a low speed, moving the fabric back and forth, and alternate to 90 degrees to secure over tears, or manoeuvre over a drawn design.
It's suitable for use with these Janome sewing machines: DC1030, JR1012, RE1306, 721, 709, 725S
The Janome Binder Foot is used to apply pre-folded bias binding tape or bias tape you have cut yourself to the edge of fabric in one easy step.
It is equipped with a small funnel to fold and guide the binding over the fabric edge before it reaches the needle and can be used with either zigzag or decorative stitches as well as straight stitch. 10 mm to 14 mm bias tape can be used.
The Janome Binder Foot will fit the following Janome sewing machine models: