Janome Bias Binder Foot - For 7mm Sewing Machines

Janome Plastic Bobbins 5 Pack

These plastic bobbins can be used for all Janome home use models.

Replace any bobbin that is worn, cracked or nicked: a damaged bobbin can cause sewing problems.

Janome Blue Plastic Bobbins - 25 Pack In Case

These bobbins fit these Janome machines (except the 1600 series and the MB-4): RE1306, JR1012, 709, 721, 725S, MW3018LE, MS5027LE, DC1030, DC2050, DC2150, DC2200, 740DC, 780DC, DC6050, DC6030, DM7200, 4120QDC, 4300QDC, SKYLINE S3, SKYLINE S6, SKYLINE S7, MC6700P, MC8200QC, MC9450QCP, CM7P, MC400E, MC500E, MC550E, MC9850, SKYLINE S9, MC15000.

Replace any bobbin that is worn, cracked or nicked: a damaged bobbin can cause sewing problems.

If your Janome machine is not included in the above list please contact us and we will let you know if this foot will work with your machine.

Janome Blue Plastic Bobbins - 25 Pack In Case

These bobbins fit these Janome machines (except the 1600 series and the MB-4): RE1306, JR1012, 709, 721, 725S, MW3018LE, MS5027LE, DC1030, DC2050, DC2150, DC2200, 740DC, 780DC, DC6050, DC6030, DM7200, 4120QDC, 4300QDC, SKYLINE S3, SKYLINE S6, SKYLINE S7, MC6700P, MC8200QC, MC9450QCP, CM7P, MC400E, MC500E, MC550E, MC9850, SKYLINE S9, MC15000.

Replace any bobbin that is worn, cracked or nicked: a damaged bobbin can cause sewing problems.

If your Janome machine is not included in the above list please contact us and we will let you know if this foot will work with your machine.

Janome Blue Tip Needle
Designed specifically for your Janome machine. The blue tip needle, a Janome exclusive, is a size #11 and is our best 'all purpose' needle for both both machine embroidery and general sewing on most types of fabrics. The needles special feature is an oversize eye to accomodate the embroidery thread. It reduces stress and tension on the top thread and makes threading easier. Slight Ball point tip.

Machine needle use: machine embroidery and general sewing
Needle System: 15x1
Needle size: 75/11

Janome Concealed Zipper Foot

It's suitable for use with these Janome sewing machines: DC2050, MC6600P, 709, 721, 725S, MW3018, MS5027, DC1030, DC2150, DC6050, 740DC, 780DC, DM7200, 4300QDC, S3

If your machine is not listed above, please ask us and we can help to find the right foot for you

Janome Overlock Foot - 5mm F/Loading

It's suitable for use with these Janome sewing machines: DC1030, JR1012, RE1306, 721, 709, 725S

If your machine is not listed above, please ask us and we can help to find the right foot for you

Janome Hemming Foot - 5mm F/Loading

Janome Gathering Foot - 5mm

It's suitable for use with these Janome sewing machines: DC1030, JR1012, RE1306, 721, 709, 725S

If your machine is not listed above, please ask us and we can help to find the right foot for you

200124007

Janome Blind Hem Foot - 5mm F/Loading

It's suitable for use with these Janome sewing machines: DC1030, JR1012, RE1306, 721, 709, 725S

If your machine is not listed above, please ask us and we can help to find the right foot for you

Janome Binder Foot - 5mm F/Loading

It's suitable for use with these Janome sewing machines: DC1030, JR1012, RE1306, 721, 709, 725S

If your machine is not listed above, please ask us and we can help to find the right foot for you

Janome Darning Foot - 5mm 

Part No. 200127000

The Darning Foot is used to both mend over holes and tears, and to perform decorative stitching by way of Free Motion. Attach the darning foot to the presser bar with the lever positioned over the needle clamp screw. Drop your machine’s feed dogs, or if not an available function, use a darning plate to disable them. Place fabric, ideally secured into an embroidery hoop. Lower the foot and sew at a low speed, moving the fabric back and forth, and alternate to 90 degrees to secure over tears, or manoeuvre over a drawn design. 

It's suitable for use with these Janome sewing machines: DC1030, JR1012, RE1306, 721, 709, 725S

Janome Binder Foot for 7mm

Part no. 200 313 005.

The Janome Binder Foot is used to apply pre-folded bias binding tape or bias tape you have cut yourself to the edge of fabric in one easy step.

It is equipped with a small funnel to fold and guide the binding over the fabric edge before it reaches the needle and can be used with either zigzag or decorative stitches as well as straight stitch. 10 mm to 14 mm bias tape can be used.

The Janome Binder Foot will fit the following Janome sewing machine models:

6019QC, 6025QC, 6260QC, CS995, DC2050, DC2101, DC2200, DC3050, DC3200, DC4030, DC6030, DC6050, DC7060, DC7100, DM7200, 2160DC, 740DC, 780DC, 3160QDC, 4120QDC, 4300QDC, MC3000, MC3500, MC4000, MC4800, MC4800QC, MC4900QC, MC5200, MC5500, MC6000, MC6500P, MS5027LE, MW3018 (My Excel 18W), MW3018LE, Sewist 625E, 4618, 4618QC, 5027, 5124, 652, 653, 654, 655, 655R (150), 659, MS2028, MS2522 , MX3123, Skyline S3.