This high quality zipper tape and zipper slides by Emmaline bags will add a professional finish to your next project!
Kit includes:
- 50cm length of Zipper tape with Silver teeth
- 2x silver zipper slides
A very sturdy, high quality press lock. No key required, this is a non-locking press lock, thumb catch, tongue lock. Install this little lock by sliding the press part onto a finished bag or wallet flap and screwing through the back to secure - USE GLUE for security! Place the backing plate prongs (the catch part) through your fabric and secure over a washer. Add a layer of stabilizer in between for strength. Easy!
Measurements: 1-1/8in (28 mm) wide x 1-1/2in (38 mm) high The groove that slides onto the bag/wallet flap has 3/16in (4mm) opening, and the lock sits about 1/2in (12 mm) high above the bag surface.
A very sturdy, high quality press lock. No key required, this is a non-locking press lock, thumb catch, tongue lock. Install this little lock by sliding the press part onto a finished bag or wallet flap and screwing through the back to secure - USE GLUE for security! Place the backing plate prongs (the catch part) through your fabric and secure over a washer. Add a layer of stabilizer in between for strength. Easy!
Measurements: 1-1/8in (28 mm) wide x 1-1/2in (38 mm) high The groove that slides onto the bag/wallet flap has 3/16in (4mm) opening, and the lock sits about 1/2in (12 mm) high above the bag surface.
A very sturdy, high quality press lock. No key required, this is a non-locking press lock, thumb catch, tongue lock. Install this little lock by sliding the press part onto a finished bag or wallet flap and screwing through the back to secure - USE GLUE for security! Place the backing plate prongs (the catch part) through your fabric and secure over a washer. Add a layer of stabilizer in between for strength. Easy!
Measurements: 1-1/8in (28 mm) wide x 1-1/2in (38 mm) high The groove that slides onto the bag/wallet flap has 3/16in (4mm) opening, and the lock sits about 1/2in (12 mm) high above the bag surface.
A very sturdy, high quality press lock. No key required, this is a non-locking press lock, thumb catch, tongue lock. Install this little lock by sliding the press part onto a finished bag or wallet flap and screwing through the back to secure - USE GLUE for security! Place the backing plate prongs (the catch part) through your fabric and secure over a washer. Add a layer of stabilizer in between for strength. Easy!
Measurements: 1-1/8in (28 mm) wide x 1-1/2in (38 mm) high The groove that slides onto the bag/wallet flap has 3/16in (4mm) opening, and the lock sits about 1/2in (12 mm) high above the bag surface.
These metal zipper pulls are made specifically to fit Emmaline Brand Zipper-By-The-Yard. You can put zipper pulls on from either direction to make double-pull zippers. Non-locking, dangle style pull. Shiny metal finish. 2 way pulls, so you can add pulls from either direction.
These quality locks are assembled a little differently than others. The front hole plate is put together with two screws (included), and the turn part has prongs that enclose over a washer that is hidden between the lining and exterior or your bag. These are professional grade quality. Installation instructions included. Measurements: 1-3/8in x 3/4in
These quality locks are assembled a little differently than others. The front hole plate is put together with two screws (included), and the turn part has prongs that enclose over a washer that is hidden between the lining and exterior or your bag. These are professional grade quality. Installation instructions included. Measurements: 1-3/8in x 3/4in
These quality locks are assembled a little differently than others. The front hole plate is put together with two screws (included), and the turn part has prongs that enclose over a washer that is hidden between the lining and exterior or your bag. These are professional grade quality. Installation instructions included. Measurements: 1-3/8in x 3/4in
These quality locks are assembled a little differently than others. The front hole plate is put together with two screws (included), and the turn part has prongs that enclose over a washer that is hidden between the lining and exterior or your bag. These are professional grade quality. Installation instructions included. Measurements: 1-3/8in x 3/4in
