Janome Sale

The Air Thread 2000D Professional is our first air thread overlocker and the easiest Janome overlocker to thread. Janome’s push and blow type air threading system is an industry first. When threading the loopers, the thread is blown down the threading channel and through the eye of the looper. The needles are just as easy to thread, using the built-in needle threader which slides left and right, allowing the user to thread the required needle. Sewing speciality fabrics is a breeze, the 8-piece feed dog allows fabric to smoothly feed under the the sewing foot, plus grooves have been added to the sewing foot to help control challenging or slippery fabrics during stitching. The 5-level foot pressure dial is located on the top left of the overlocker. Integrating the stitch length and differential dials makes for easy and perfect adjustment for the fabric being sewn, whether sewing stretch to lightweight woven fabric. Adjusting the cutting width or dropping the upper knife, is all easily accessed in the one place, open the front cover and just the turn of a dial lowers the upper knife, turn again to re-engage. Safety, is important, the overlocker will not operate if, any covers are open, the sewing foot is raised or if the air thread mechanism is engaged. Another industry first is two ball bearing on the main shaft which provide low torque, making this overlocker powerful and stable when operating, even at high speeds. All of these features are specially designed to make this overlocker the easiest to use on the market today.

Features
- One-Push Air Threading System
- 8-Piece Feed Dog System
- Built-in One-step Converter
- Built-in Needle Threader

Accessories
- Overlock Foot (on overlocker)
- Screwdriver (Lge)
- Screwdriver (Sml)
- Double ended spanner
- Tweezers
- Needle Set – Organ HAx1SP (2 x #11, 3 x #14)
- Net x 4
- Spool Holder Cap (Lge) x 4
- Lint Brush
- Oil
- Needle holder / spreader pin
- Spare Upper Knife
- Looper threading wire
- Accessory Box
- Waste Chip Box
- Instruction Book
- Instructional DVD
- Dust Cover
- Foot Control

....

Janome DC2030 Sewing Machine

The Janome DC2030 is a computerised sewing machine with 30 built-in stitches including 1 memory buttonhole.
On the front of the machine is a stitch reference guide, which displays an image of each stitch.
This selection of stitches allows you to be creative using a variety of sewing techniques.
Functions included on this model are built-in needle threader, needle up/down button, reverse button and a one-hand thread cutter.
Also, there is convenient storage in an accessory box.

BONUS accessories have been packaged in the machine carton to enhance your sewing pleasure. These extras are a large extension table, 1/4 inch seam foot and an even feed foot.

Features
- 30 Built-in stitches
- Memory buttonhole
- Max.sewing speed up to 820 stitches per minute
- Speed control slider
- 4 Standard Feet - ZigZag, Zipper, Satin Stitch & Buttonhole
- LED Display
- LED Light
- Extra high lift on presser foot lifter
- Auto-lock off stitch button
- Soft machine cover
- Built-in needle threader
- Drop feed
- Start/stop button
- Needle up/down button
- Lightweight 5kg

Additional Information
- Machine Size - W385 x H282 x D150mm
- Weight - 5.0Kg
- Work Space - 158.5mm (6.2")
- Sewing Speed - up to 820 stitches per minute
- Machine Screen - 2 Digit LED Display
- Built-in Stitches - 30
- Buttonholes - Memory Buttonhole
- Foot Control - Yes
- Foot Pressure - No
- Needle Threader - Yes
- Lighting - White LED light
- Standard Sewing Feet - 4 + 2 BONUS Feet
- Extra Wide Table - Yes, half size
- Quick Reference Stitch Chart - Yes on machine front
- Stitch Length - Up to 4mm
- Speed Control Slide - Yes
- Bobbin Winder - Yes
- Drop Feed - Yes
- Superior Plus Feed System - 4 piece feed dog
- Thread Cutter - On face plate
- Reverse Button - Yes
- Storage - Yes – in accessory box
- Needle Up/Down Function - Yes – without memory function
- Carry Handle - Folding short handle on top of machine
- Internal Frame - Rigid die-cast aluminium frame
- Auto Lock-off Stitch button - Locks off your stitching at the push of button
- Needle Plate - Has patented needle plate markings for precision sewing with needle drop position.
- Stop/Start Button - Can sew without foot control. Hold button when start sewing & machine sews slow, same at end of sewing press & hold button & machine will sew slow

Standard Accessories
- Zigzag Foot A
- Zipper Foot E
- Satin Stitch Foot F
- Buttonhole Foot J (sliding 5mm)
- Janome Plastic Bobbins x 3
- Needle Set (3 x #14 sharp)
- Additional Spool Pin
- Screwdriver
- Lint Brush
- Seam Ripper
- Spool Holder (large)
- Spool Holder (small)
- Foot Control
- Power Cable
- Instruction Book
- Machine Dust Cover
- BONUS Large Extension Table (packaged with machine)
- BONUS 1/4 Inch Seam Foot (packaged with machine)
- BONUS Even Feed Foot (packaged with machine)

 * Please note it is not abnormal that a faint humming or high pitch sound comes out from inside these machines. 

....

Janome 780DC Sewing Machine

The Janome Sewist 780DC is a simple to use, fully computerized sewing machine that is packed with time saving features.

This machine has 80 stitches, for many various sewing applications.  Direct stitch selection is available for 20 stitches, the other 60 stitches are pictured on the easy access slide out stitch charts.  When a stitch is selected the LCD screen shows the selected stitch, recommended foot, default stitch width and length, which you can change to suit your requirements. The Sewist 780DC also offers a choice of 3 styles of one-step buttonholes.

Special features include the automatic thread cutter, when activated trims the top and bobbin thread at the same time, pulling the top thread to the underside of the fabric.  Stitch elongation on satin stitches allows the stitch pattern to be elongated of up to 5 times the default stitch length; easy set bobbin system; auto bobbin winder system; built-in needle threader; needle up/down button; and an auto-lock stitch feature for precision locking off of stitches and patterns. The start/stop button allows you to sew without a foot control.

Features:
- Horizontal rotary hook
- 80 built-in stitches
- 20 direct select
- 3 one-step buttonholes
- Manual thread tension control
- Built-in, one-hand needle threader
- Snap-on presser feet
- Needle up/down with down as default setting
- 7-piece feed dog
- Free-arm
- Drop feed
- Start/stop button
- Locking stitch button
- Easy reverse button
- Automatic thread cutter
- Extra high presser foot lift
- Backlit LCD screen with easy navigation keys
- Maximum stitch width: 7mm
- Maximum stitch length: 5mm
- Hard cover included
- Foot pressure adjustment

Standard Accessories: 
- Automatic Buttonhole Foot
- Blind Hem Foot
- Bobbins x4
- Needle Set
- Overedge Foot
- Quilting Guide
- Satin Stitch Foot F
- Seam Ripper
- Zig-Zag Foot
- Zipper Foot
- Hard Machine Cover

 ....

Introducing the Memory Craft 550E Limited Edition Embroidery Machine—the ultimate tool for embroidery enthusiasts looking to elevate their craft. This embroidery-only machine boasts an impressive 200 x 360mm embroidery field, offering one of the largest stitching areas available, perfect for creating bold designs on home décor items, garments, and accessories.

With 4 included hoops and a spacious extra-wide table, the MC550E Limited Edition supports large, intricate projects effortlessly. Explore endless creative possibilities with 180 built-in embroidery designs and 6 unique monogramming fonts for personalized touch. Designed for user convenience, it features an intuitive threading guide and a superior needle threader, making setup quick and seamless.

Easily upload designs via USB, and take advantage of advanced on-screen editing features through the large, high-definition LCD color touch screen for precise customization. For added convenience, this machine includes an automatic power-off feature, ensuring safety and energy efficiency. With the Memory Craft 550E Limited Edition, bring your creative visions to life with unmatched ease and versatility.

Key Features:
- Maximum embroidery size: 200x360mm
- 180 built-in designs
- 6 fonts for monogramming
- Anti-kink thread guide
- Patent pending hoop levers on RE36b hoop
- USB port- 2 and 3 letter monogramming
- Embroidery sewing speed: up to 860 SPM
- Flexible stitch traveling (by units of 1, 10, 100, 500)
- Auto return post thread break
- On-screen editing functions include enlarge/ reduce, rotate, flip, drag and drop, arc, combine, copy and paste, grouping, corner layout, single color sewing, zoom

Standard Accessories:
- Embroidery Foot P
- 5 x Janome Plastic Bobbins
- Needle Set
- Screwdriver (large)
- Screwdriver (flat)
- Lint Brush
- Spool Holder x 2 (large)
- Spool Holder x 2 (small)
- Spool Holder x 2 (special)
- Extra Spool Pin
- Embroidery Scissor
- Touch Panel Stylus
- Bobbin Holder Cleaner
- Embroidery Hoop RE36b (with template) 200x360mm
- Embroidery Hoop SQ20b (with template) 200x200mm
- Embroidery Hoop RE20b (with template) 140x200mm
- Embroidery Hoop SQ14b (with template) 140x140mm
- 8 x Magnetic Clamps (for RE36b hoop)
- Anti-slip Tape (for hoops)
- Bobbin Holder with red dot
- Bobbin Holder with yellow dot
- Key Icon Reference Chart
- Power Cable
- Instruction Book
- Quick Reference Guide
- Instructional Video DVD
- Embroidery Editor CD-ROM (Windows only)
- Soft Machine Cover
- Extra Wide Table (white)

Weight: 11.5kg

....

The Memory Craft 400E is an embroidery-only model with advanced editing capabilities. You can design and create in the edit screen by selecting from the machine’s built-in designs, which include 160 embroidery designs, 6 fonts for monogramming, border designs and normal sew patterns. The possibilities are endless. It’s so easy for you to personalise, embellish, and monogram home décor items, clothing and accessories. The MC400E has a maximum embroidery size of 200 x 200mm. Embroidery designs are easily imported to the machine via a USB stick (up to 16GB). These imported designs can also be edited through the machine’s advanced on-screen editing functions, and navigation through all of these features is so easy using the LCD colour touch screen.

Features
Maximum embroidery size: 7.9” x 7.9”
- 160 built-in designs
- 6 fonts for monogramming
- 2 and 3 letter monogramming
- Embroidery sewing speed: 400-860 SPM
- Flexible stitch traveling (by units of 1, 10, 100)Auto return post thread break
- On-screen editing functions include enlarge/ reduce, rotate, flip, drag and drop, arc, combine, copy and paste, grouping, corner layout, single color sewing, zoom
- SQ20b Hoop (7.9" x 7.9")

Accessories
- Embroidery Foot P
- 5 x Janome Plastic Bobbins
- Needle Set
- Screwdriver (large)
- Screwdriver (flat)
- Lint Brush
- Spool Holder x 2 (large)
- Spool Holder x 2 (small)
- Spool Holder x 2 (special)
- Extra Spool Pin
- Embroidery Scissor
- Touch Panel Stylus
- Bobbin Holder Cleaner
- Embroidery Hoop SQ20b (with template) 200x200mm
- Bobbin Holder with red dot
- Bobbin Holder with yellow dot
- Power Cable
- Instruction Book
- Quick Reference Guide
- Template Sheet with Built-in Designs CD
- Instructional Video DVD
- Soft Machine Cover

 ....

The Skyline S3 is the entry level in the Skyline range and it is also jam-packed with powerful features. The Skyline Range has been designed for every type of sewing – everyday projects, home décor, high fashion, patchwork and quilting. The Skyline S3 has 210mm wide x 120mm high workarea to the right of the needle with a height of 120mm (4.7”), giving you plenty of room to cope with those bigger projects. With a great range of 120 stitches, including a choice of 7 styles of buttonholes plus an alphabet, this machine offers creativity on every sewing project. Just flip up the top cover on the machine to view the huge variety of 7mm wide stitch styles available. The stitch quality is excellent at speeds of up to 820 stitches per minute whilst the special built-in features will help you cope with almost any sewing challenge. Pivot on corners with the needle up/down feature, control the maximum sewing speed for precision work, trim off threads with the built-in automatic thread cutter, thread the needle automatically … everything you need to make your sewing easier.

Features
- Work Space: 210mm (8.3") x 120mm (4.7")
- Sewing Speed: up to 820 stitches per minute
- Easy Change Needle Plate: Yes
- Machine Screen: Backlit black & white LCD screen
- Built-in Stitches: 170
- Stitch Width: 7mm
- Buttonholes: 7
- Needle Positions: 15
- Foot Pressure: Yes
- Needle Threader: Yes
- Lighting: 4 white LED lights
- Standard Sewing Feet: 7
- Extra Wide Table: Optional
- Machine Size: W504 x H316 x D236mm
- Weight: 10Kg
- Free Arm Length: 100mm from needle
- Embossed Measures: Yes, on the sewing bed
- Quick Reference Stitch Chart: in lid of machine
- Stitch Length: Up to 5mm
- Speed Control Slide: Yes
- Stitch Elongation: Yes
- Mirror Image Stitches: Yes
- Startover: Yes, stitch will reset back to the beginning.
- Bobbin Winder: Yes
- Fonts in Normal Sew: 1 font (Block with 3 alphabets)
- Drop Feed: Yes
- Superior Plus Feed System: 7 piece feed dog; no more fabric slipping, puckering and shifting
- Needle Plate: has patented needle plate markings for precision sewing with needle drop position, angle marks and sewing guides in front of the sewing foot
- Thread Cutter: automatic thread cutter; cuts top & bobbin thread at the same time, pulling top thread to underside
- Stop/Start Button: can sew without foot control. Hold button when start sewing & machine sews slow, same at end of sewing press & hold button & machine will sew slow
- Needle Up/Down Function: Yes
- Auto Lock-off Stitch button: locks off your stitching at the push of button
- Reverse Button: Yes
- Magnifier: Optional, set of 3 AcuView magnifiers™ (1.2, 1.4, 1.6 lens)
- Storage: large accessory box gives you front & under the free arm storage
- Carry Handle: long handle slots neatly around the top of machine
- Foot Control: Yes
- Internal Frame: rigid die-cast aluminium frame for stable sewing at high speeds

Accessories
- Zigzag Foot A
- Zipper Foot E
- Satin Stitch Foot F
- Blind Hemming Foot G
- Overedge Foot M
- 1/4" Seam Foot O
- Automatic Buttonhole Foot R
- Stabilizer Plate for B/hole Ft
- Janome Plastic Bobbins x 4
- Needle Set
- Additional Spool Pin
- Screwdriver (lge)
- Lint Brush
- Seam Ripper
- Spool Holder (large) x 2
- Spool Holder (small) x 2
- Spool Holder (special) x 2
- Foot Control
- Power Cable
- Instruction Book
- Instructional Video DVD
- Semi-hard Fabric Machine Cover

....

Introducing the Skyline S6AE, a feature-packed sewing machine designed for all levels of sewists. With 196 built-in stitches, including 10 one-step buttonholes and 1 font with 4 alphabets, this machine offers versatility for any project. Enjoy precise stitching with the AcuFeed™ Flex Layered Fabric Feeding System, while the impressive speed of up to 1,000 stitches per minute ensures efficiency.

The Skyline S6AE is equipped with 6 LED lights in 3 strategic locations for optimal visibility, an automatic thread cutter, and a superior needle threader (version 2) for easy setup. Create stunning designs with 9mm decorative stitches and 7 adjustable foot pressure levels for maximum control.

The LCD screen offers 8 direct stitch selection keys featuring your most commonly used stitches, along with easy access to advanced functions such as stitch elongation, twin needle settings, mirror image, stitch start-over, machine lock, and the set menu. A convenient stitch chart inside the machine lid organizes stitches by functionality, including buttonholes, satin stitches, quilting stitches, and decorative alphabets.

The Skyline S6AE also comes with a spacious extra-wide table as a standard accessory, perfect for larger projects. This advanced machine combines power, precision, and ease of use, making it the ideal choice for any sewing enthusiast.

STANDARD ACCESSORIES
- Zigzag Foot A
- Rolled Hem Foot D
- Zipper Foot E
- Satin Stitch Foot F
- Blind Hemming Foot G
- Overedge Foot M
- 1/4˝ Seam Foot O
- Darning Foot PD-H
- Automatic Buttonhole Foot R
- Stabilizer Plate for B/hole Ft
- Button Sewing Foot T
- AcuFeed Holder (twin)
- AcuFeed Foot AD (twin)
- Straight Stitch Needle Plate
- Janome Plastic Bobbins x 5
- Needle Set [#14 sharp, purple tip, blue tip x 2, twin needle]
- Additional Spool Pin
- Screwdriver (lge)
- Lint Brush
- Seam Ripper
- Quilting Guide Bar
- Spool Holder (large) x 2
- Spool Holder (small) x 2
- Spool Holder (special) x 2
- Touch Panel Stylus
- Foot Control (C-1036)
- Adjustable Knee Lifter
- Extra Wide Table
- Power Cable
- Instruction Book
- Instructional Video download
- Semi-hard Fabric Machine Cover

Weight: 10.7kg

Introducing the Skyline S7AE, a special edition celebrating the 10th anniversary of the Skyline range. This advanced sewing machine boasts 350 built-in stitches, including 11 customizable buttonholes and 3 fonts/7 alphabets, making it perfect for both quilters and designers. With the AcuFeed™ Flex Layered Fabric Feeding System and automatic presser foot lift, precise fabric handling is effortless.

Elevate your sewing experience with professional-grade accessories, such as the HP Professional Needle Plate, HP Foot, and HP2 AcuFeed Professional foot, available for add-on purchase. Customize your buttonholes with adjustable stitch width, density, and opening size, while the new style feed dogs ensure smooth fabric feeding.

Simplify your projects with the Sewing Applications menu, featuring Stitch Tapering, Ruler Work Mode, and more, without needing to consult a manual. Plus, enjoy the convenience of an extra-wide table, included in the box.

Upgrade your sewing with the Skyline S7AE—precision, innovation, and professional results at your fingertips.

STANDARD ACCESSORIES:
1/4˝ Seam Foot O
Darning Foot PD-H
Free Motion Quilting Closed-toe Foot QC
Free Motion Quilting Open-toe Foot QO
Free Motion Quilting Zigzag Foot QV
Automatic Buttonhole Foot R
Stabilizer Plate for B/hole Ft
Button Sewing Foot T
AcuFeed Holder (twin)
AcuFeed Foot AD (twin)
Straight Stitch Needle Plate
Janome Plastic Bobbins x 5
Needle Set [#14 sharp, purple tip, blue tip x 2, twin needle]
Additional Spool Pin
Screwdriver (lge)
Lint Brush
Seam Ripper
Quilting Guide Bar
Spool Holder (large) x 2
Spool Holder (small) x 2
Spool Holder (special) x 2
Button Shank Plate
Touch Panel Stylus
Foot Control (large style)
Adjustable Knee Lifter
Extra Wide Table
Power Cable
Instruction Book
Instructional Video online
Stitch Composer Software [windows only] download
Semi-hard Fabric Machine Cover

Bonus Accessories (with Anniversary Edition)
- 6x Quilt Clips
- Janome Pincushion
- Curved Embroidery Scissors
- 25x Janome bobbins in Anniversary Edition case
- Glass Head Pins

....

The Memory Craft 6700P Professional is the first domestic flat-bed sewing machine with a one-step needle plate conversion. It is the fastest domestic machine in its class with a maximum sewing speed of 1,200 stitches per minute. The 255mm (10”) of flat seamless work area is a pleasure to work on, and once the large extension table is attached, the work space is significantly increased. Lighting is no issue, white LED’s are located in 3 areas which illuminates the work space allowing you to sew at your leisure, day or night. An LCD screen along with the large chart reference chart make it so easy to navigate through the 200 built-in stitches, including 9 one-step buttonholes and 2 alpha numeric fonts including 9mm lettering and numbers. You can customise each stitch including buttonholes plus save as a favourite stitch. Plus, this model has customisation of the direct stitch screen, you can replace 7 of the original stitches and replace them with 7 of your favourite or most used stitches, this is a great time saving feature. Quilters and designers will appreciate the AcuFeed™ Flex Layered Fabric Feeding System, and the manual controlled foot pressure which can be adjusted in very small or large increments, to perfecting stitch your chosen fabric.

Key Features:
- 200 Stitches PLUS 5 Alphabets
- Maximum Sewing Speed: 1,200 SPM
- Superior Needle Threader
- One-Push Needle Plate Conversion with 3 Included Plates
- Detachable AcuFeed Flex Layered Fabric Feeding System
- 10" All-Metal Seamless Flatbed
- Professional HP Needle Plate and Foot
- 6 LEDs in 3 Locations
- Memorized Needle Up/Down
- 17 included accessory feet
- Large Extension Table Included
- Detachable Stitch Chart

Standard Accessories:
1/4 Inch Seam Foot O
- AcuFeed Flex™ Dual Feed Holder with AD Foot
- Automatic Buttonhole Foot R with Stabilizer Plate
- Blind Hem Foot G
- Button Sewing Foot
- Buttonhole Foot
- Buttonhole Stabilizer Plate
- Convertible Freemotion Quilting Foot Set
- Darning Foot
- Extra Large Foot Controller
- Free Motion Quilting Holder
- HP Foot
- HP Needle Plate
- Open Toe Satin Stitch Foot
- Overedge Foot M
- Rolled Hem Foot
- Satin Stitch Foot
- Seam Ripper
- Straight Stitch Needle Plate
- Zig-Zag Foot
- Zipper Foot E

....

The Skyline S9 is the first machine in its series to include both sewing and embroidery and with its Wi-Fi capability you can easily send embroideryesigns from an iPad or computer straight to the machine. There are 6 Janome iOS APPS available for the Skyline S9 being AcuEdit, AcuMonitor, AcuDesign, ScreenSaverTool, AcuSetter and AcuSketch to make your sewing and embroidery time more efficient. Enjoy choosing up to 250 embroidery designs, including 40 exclusive designs by Anna Maria Horner along with 300 built-in stitches. With a maximum embroidery size of 170 x 200mm and sewing speeds of 1000 SPM, the Skyline S9 provides a full suite of powerful capabilities to ensure all projects are beautiful, yet easily executed. Navigating through these great features is easy with the Skyline S9’s LCD colour touchscreen.

Features
- 250 built-in embroidery designs including 40 exclusive designs by Anna Maria Horner
- 16 fonts for monogramming
- Maximum embroidery size: 6.7" x 7.9"Free arm embroidery
- Design transfer via Wi-Fi, USB and direct PC connection
- Sewing speed up to 1,000 SPM
- On-screen editing functions include enlarge/reduce, rotate, turnover, drag and drop, zoom, arc, combine
- Programmable jump thread trimming
- Adjustable speed while embroidering
- Flexible stitch traveling by 1, 10, 100 and 500 stitches
- Auto return post thread break
- Adjustable hoop position even after starting embroidery
- Cutwork enabled
- Embroidery couching function
- Thread brand selection: Janome (Polyester and Acrylic), Gutermann, Sulky, Madeira, Robison-Anton, Mettler, Jenny Haskins
- Standard Hoops: RE20a (6.7" x 7.9"), SQ14a (5.5" x 5.5"), FA10a (3.9" x 1.6")
- Top loading full rotary hook bobbin
- 300 built-in stitches including 7 alphabet fonts
- 11 one-step buttonholes
- Automatic thread tension control
- Superior needle threader
- Snap-on presser feet
- Automatic presser foot lift
- Memorized needle up/down
- AcuFeed™ Flex Layered Fabric Feeding System
- Stitch tapering function
- Variable zig zag
- AcuGuide automatic cloth guide
- Free arm
- Drop feed
- Start/stop button
- Locking stitch button
- Automatic thread cutter
- Twin needle guard
- Easy reverse button
- Memory function
- Last stitch recall capability
- Adjustable Knee lift
- Machine size: 20" x 12" x 9"Machine weight: 26lbs
- Work space: 8.3"
- Auto declutch bobbin winder
- Extra high presser foot lift
- LCD touchscreen
- Automatic foot pressure adjustment
- Maximum stitch width: 9mm
- Maximum stitch length: 5mm

Accessories
- 1/4 Inch Seam Foot O
- AcuFeed Flex™ 1/4 Inch Seam Foot (Twin)
- AcuFeed Flex™ Dual Feed Holder with AD Foot
- AcuFeed Flex™ Holder and Foot (Single)
- AcuFeed Zipper Foot (Single)
- Automatic Buttonhole Foot R with Stabilizer Plate
- Blind Hem Foot G
- Button Sewing Foot
- Darning Foot
- Embroidery Couching Foot
- Embroidery Hoop FA10
- Embroidery Hoop RE20a (170mm x 200mm)
- Embroidery Hoop SQ14a (140mm x 140mm)
- Extra Large Foot Controller
- Free Motion Quilting Closed Toe Foot
- Free Motion Quilting Open Toe Foot QO
- Free Motion Quilting Zig-Zag Foot
- Knee Lifter
- Open Toe Satin Stitch Foot
- Overedge Foot M
- Quilting Guide Bar
- Rolled Hem Foot
- Satin Stitch Foot
- Straight Stitch Needle Plate
- Zig-Zag Foot
- Zipper Foot E

....

Now designers can create projects to reflect their personal sense of style with the Memory Craft 500E. It’s easy to personalise, embellish and monogram home décor items, garments and accessories. With 160 built-in embroidery designs and 6 fonts for monogramming, the possibilities are endless. The MC500E has a maximum embroidery size of 200 x 280mm (7.9″X11″)and an extra wide table.

Designs are easily imported through a USB and edited through the machine’s advanced on-screen editing functions. Navigation through all of these features has become easier with the MC500E’s LCD colour touch screen.

Features
- Maximum embroidery size: 7.9” x 11”160 built-in designs
- 6 fonts for monogramming
- 2 and 3 letter monogramming
- Embroidery sewing speed: 400-860 SPM
- Flexible stitch traveling (by units of 1, 10, 100)
- Auto return post thread break
- On-screen editing functions include enlarge/ reduce, rotate, flip, drag and drop, arc, combine, copy and paste, grouping, corner layout, single color sewing, zoom
- RE28b Hoop 7.9" x 11"(200x280mm) SQ20b Hoop 7.9" x 7.9" (200x200mm) 

Accessories
- Bobbin Holder for Embroidery (High Tension)
- Embroidery Foot
- RE28b Embroidery Hoop
- SQ20b Embroidery Hoop

....

Janome ML644D Overlocker

The MyLock 644D includes essential features for simple overlocking.
The differential feed system of two feed dogs virtually eliminates puckered edges on woven fabrics and stretched edges on knits.
Its unique rolled hem conversion feature eliminates the need to change the needle plate, foot, or tension setting for rolled hemming.
Janome has restructured the lower looper guides for easy access. Colour-coded guides are easy to follow for 2, 3, or 4 thread overlocking.
All of the features on this machine are specially designed to make this overlocker the easiest to use on the market today.

Features
- 2, 3, or 4 thread overlock
- Lay-in thread tension dialSeam width: 1 – 5mm seam length3.3mm (narrow), 7.5mm (wide) 2.0mm Rolled hem
- Slim foot
- Handy needle threader
- Convenient thread cutter
- Easy rolled hem change-over
- 0.5 – 2.2 differential feed ratio
- Easy upper knife release
- Adjustable cutting width: 3.1 – 5.1mm
- Easy lower looper threading
- Differential feed
- Lower looper pre-tension setting slider
- Changeable thread guide
- Front and back needle guard
- Retractable upper knife
- Numbered tension dials
- Colour-coded thread guides
- Snap-on presser feet
- Overlocker
- Sewing speed 1,300 SPM
- Weight 8Kg

Standard Accessories
- Screwdriver (Large)
- Screwdriver (Small)
- Tweezers
- Set of needles No.11, No.14
- Nets x 4
- Spool holder caps x 4
- Lint brush
- Needle threader
- Oil
- Spreader for 2 thread
- Spanner
- Spare Upper knife
- Needle threader
- Waste chip box
- Accessory box
- Instruction Book
- Instructional DVD
- Foot Control

....