Janome AcuFeed - Dual Feed Open Toe Foot - Twin
The Janome Acufeed Open Toe Foot Twin is one of the interchangeable feet for the AcuFeed Flex Twin holder.
There are certain techniques that often require better visibility of stitches such as quilting, applique, cut work and craft work.
The AcuFeed Open Toe Foot will solve all those problems allowing a much better view of the sewing in progress whilst guiding the fabric smoothly and evenly.
Fits these models: MC6700P, MC8200QCP, MC8900QCP, MC9400, MC9450, MC12000, MC14000, MC15000, Skyline S6, Skyline S7, Skyline S9 and the Continental M7 Professional.
Part no. 201 149 004
Janome Blue Tip Needle
Designed specifically for your Janome machine. The blue tip needle, a Janome exclusive, is a size #11 and is our best 'all purpose' needle for both both machine embroidery and general sewing on most types of fabrics. The needles special feature is an oversize eye to accomodate the embroidery thread. It reduces stress and tension on the top thread and makes threading easier. Slight Ball point tip.
Machine needle use: machine embroidery and general sewing
Needle System: 15x1
Needle size: 75/11
Janome 9mm Lapped Seam Foot
This foot can provide perfect-looking and durable seams on medium-heavy weight to heavyweight fabrics. You can create beautiful lap seams without ironing.
Available for 9mm Maximum Stitch Width Machines
Part Number: 202463007
Janome Ruffler Foot - 9mm Models - 202095004
Do you want amazing perfect rufflers? Then THIS IS THE FOOT FOR YOU!
Rufflers have been around for a very long time and have changed very little over the years; they have however remained very popular. Although at first sight a ruffler may appear bulky and complicated, its innovative design actually makes it very easy to use. This design allows fabric to be ruffled or pleated to the desired fullness quickly and easily and also has the capability to vary the sizes of ruffles.
Fits: Skyline S5, Skyline S6, Skyline S7, Skyline S9, MC8200, MC8900, MC9400, MC6650, MC6700P, CM7, CM8, MC9480, MC9450 , MC9850, MC 9900, MC12000, MC14000 and MC15000.
Janome Overlocker Carry Bag - Cube Design
Measurements: L 35cm x W 32cm x H 35cm
( Fits up to a Janome AT2000D Overlocker )
Janome Zipper Foot 7mm Width
This foot can be set to sew on each side of the zipper by adjusting the position of the foot and tightening the thumb screw. Also great for sewing close to piping.
Compatibe with 7mm stitch width low shank Janome and Elna Machines
These purple tip needles by Janome effectively prevent skipped stitches when sewing and embroidering on heavy fabrics, including knits, quilting multiple layers, and also for sewing across the hem. They have a ball point tip that prevents fabric thread breakage and a special "cobra" head that reduces fluctuation of fabric that causes skipped stitches.
Machine Needle Use: Quilting multiple layers, thick dense fabrics and dense embroidery
Needle Size: 90/14
Needle System: 15x1
Janome Hem Guide Type 2 - For Coverpro Machines - 795839104
The Janome Cover Hem Guide is a relaible method of creating straighter seams. Folding over a consistent width of fabric (5/8" - 1 3/4") for creating cover stitch hems is not the only benefit of Janome's Hem Guide. It also aids in attaching lace in garment and home decor applications.
Janome HP2 Foot - 202415004
This foot provides superior visibility and is great for curves and precise topstitching. It holds fabrics firmly in sync with the feed dogs to achieve professional results.
For use in combination with the professional grade needle plate (HP)
Matching the edge of the fabric against the edge of the foot will give you a perfect 1/4" seam allowance.
JANOME HD Roller Foot Cat C High Shank 7mm, Cat D 9mm Machines - 202418007
For Category C & D, 1600p & HD9 (Not MC7700QCP)
The Janome HD roller foot is for sewing curves, topstitching and piping with a large pipe. This foot gives you a better view and allows you to manipulate the fabric easily and accurately.
This innovative new foot can smoothly control materials such as leather and vinyl which are prone to catch in the feed dogs. When using this foot, the base of the needle is clearly visible, making your work easier.
Smooth Feeding of Fabric - Because the roller holds the material while rotating, materials such as leather and vinyl are fed smoothly. Also makes sewing curves a breeze.
Great for Piping - Thick piping cord can also be sewn with the needle directly beside the cord. If a Zig-Zag or Satin Stitch foot were used, the side of foot would be against the cord instead. Can be used with piping cord which is 17mm or less in diameter.
Adjust roller position relative to needle position - For best sewing results, position the roller and needle close to each other. Combined with the roller holding down the fabric, this has the effect of keeping the stitch length as uniform as possible.
With sharp curves, setting a short stitch length is also effective. Test sewing and adjusting thread tension and stitch length is recommended.
Roller part is retractable - The roller can be retracted to the left side to make a space around the needle and allow for easier threading. The roller part can be moved while pushing the screw at the top of the foot.
Handling of delicate materials - When working with delicate materials such as leather, enamel and vinyl, you can place a thin layer of paper between the roller and the feed dogs in order to prevent it leaving marks on the material. If the pressure is too strong, scratches or damage to the roller may also occur, so adjusting foot pressure to recommended values is advised. For recommended foot pressure for each sewing machine, please refer to the included Roller foot instructions.
Compatible with High Speed Machines, and High Shank 9mm and 7mm stitch width models.
Janome HD9 Professional
Janome 1600P-QC
Janome Horizon Memory Craft 9450QCP
Janome Atelier 9
Janome Atelier 7
Janome Horizon Memory Craft 15000
Janome Horizon Memory Craft 15000 V2
Janome Memory Craft 6650
Janome Memory Craft 6700P
Janome Memory Craft 9850
Janome M7 Continental
