Introducing Creative Grids Quilting Rulers!
This 6-1/2 x 12-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.
Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that two angles cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units; squares set on point or mark cross-hatching. The ruler also features a 30degree/60degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Scan the QR Code printed on the ruler to view a tutorial of these features. This 6-1/2 inch width is also available in 18 inch (ItemCGR618) and 24 inch (Item CGR24) lengths.
Total Size - 6-1/2in x 12-1/2in
Creative Grids® products are made in the USA
This 4-1/2 x 8-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.
Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that two angles cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units; squares set on point or mark cross-hatching. The ruler also features a 30degree/60degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Scan the QR Code printed on the ruler to view a tutorial of these features. This 4-1/2 inch width is also available in 12-1/2 inch (Item CGR412) and 18-1/2 inch (Item CGR418) lengths.
Total Size - 4-1/ 2in x 8-1/2in
Creative Grids® products are made in the USA
This 4-1/2 x 12-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.
Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that two angles cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units; squares set on point or mark cross-hatching. The ruler also features a 30degree/60degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Scan the QR Code printed on the ruler to view a tutorial of these features. This 4-1/2 inch width is also available in 8-1/2 inch (Item CGR48) and 18-1/2 inch (Item CGR418) lengths.
Total Size - 4-1/2in x 12-1/2in
Creative Grids® products are made in the USA
This 4-1/2 inch square is the perfect companion for anyone who loves to work with the 5 inch pre-cuts on the market. The diagonal line makes trimming half-square triangles created with these 5 inch squares a piece of cake.
It features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and ¼ inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.
A 45 degree angle is printed in black and is used to trim half-square triangles to size. White horizontal and vertical lines are printed on the square so the center of the ruler is easily distinguishable. Use these lines to square up blocks based on four-patches or embroidered and appliqued blocks.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!
Total Size - 4-1/2in x 4-1/2in
Creative Grids® products are made in the USA
This 3-1/2 x 6-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.
Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. These 45 degree lines cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units; squares set on point or mark cross-hatching. The ruler also features a 30 degree/60 degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! This 3-1/2 inch width is also available in 12-1/2 inch (Item CGR312); 18-1/2 inch (Item CGR318) and 24-1/2 inch (Item CGR324) lengths.
Total Size - 3-1/2in x 6-1/2in
Creative Grids® products are made in the USA
This 3-1/2 x 18-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.
Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance. Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that two angles cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units; squares set on point or mark cross-hatching.
The ruler also features a 30degree/60degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders. This 3-1/2 inch width is also available in 6-1/2 inch (Item CGR36); 12-1/2 inch (Item CGR312) and 24-1/2 inch (Item CGR324) lengths. Scan the QR Code printed on the ruler to view a tutorial of these features.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!
Total Size - 3-1/2in x 18-1/2in
Creative Grids® products are made in the USA
This 3-1/2 x 12-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.
Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance. Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that two angles cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units; squares set on point or mark cross-hatching.
The ruler also features a 30degree/60degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Scan the QR Code printed on the ruler to view a tutorial of these features. This 3-1/2 inch width is also available in 6-1/2 inch (Item CGR36), 18-1/2 inch (Item CGR318) and 24-1/2 inch (Item CGR324) lengths.
Total Size - 3-1/2in x 12-1/2in
Creative Grids® products are made in the USA
This 20-1/2 inch square features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.
Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance. A 45 degree angle is printed in black and is used to trim half-square triangles to size. White horizontal and vertical lines are printed on the square so the center of the ruler is easily distinguishable. Use these lines to square up blocks based on four-patches or embroidered and appliqued blocks.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Scan the QR Code printed on the ruler to view a video demonstration of these features.
Total Size - 20-1/2in x 20-1/2in
Creative Grids® products are made in the USA
This 2-1/2 x 24-1/2 inch rectangle ruler is the perfect size! It fits cleanly on your mat without any overhang, and cutting directly off the bolt has never been easier! The ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches.
The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature, designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides, to add the 1/2 inch seam allowance. Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that they cross 1/4 inch away from the outside edge.
Use these markings to square up flying geese units and squares set on point. The ruler also features a 30 degree/60 degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders. This 2-1/2 inch width is also available in 12-1/2 inch (Item CGR212); 18-1/2 inch (Item CGR218); and 36-1/2 inch (Item CGR236) lengths.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!
Total Size - 2-1/2in x 24-1/2in
Creative Grids® products are made in the USA
This 2-1/2 x 18-1/2 inch rectangle ruler is the perfect companion for anyone who loves to work with the 2-1/2 inch pre-cuts on the market. It features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches.
The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance. Use the white 45 degree angle to trim half-square triangles in whole inch increments.
Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that they cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units and squares set on point. The ruler also features a 30 degree/60 degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! This 2-1/2 inch width is also available in 12 inch (Item CGR212); 24 inch (Item CGR224); and 36 inch (Item CGR236) lengths.
Total Size - 2-1/2in x 18-1/2in
Creative Grids® products are made in the USA
This 2-1/2 x 12-1/2 inch rectangle ruler is the perfect companion for anyone who loves to work with the 2-1/2 inch pre-cuts on the market. It features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches.
The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance. Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments.
An additional black 45 degree line is placed so that two angles cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units; squares set on point or mark cross-hatching. The ruler also features a 30degree/60degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! This 2-1/2 inch width is also available in 18-1/2 inch (Item CGR218); 24-1/2 inch (Item CGR224); and 36-1/2 inch (Item CGR236) lengths.
Total Size - 2-1/2in x 12-1/2in
Creative Grids® products are made in the USA
This 18-1/2 inch square features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.
Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance. A 45 degree angle is printed in black and is used to trim half-square triangles to size. White horizontal and vertical lines are printed on the square so the center of the ruler is easily distinguishable. Use these lines to square up blocks based on four-patches or embroidered and appliqued blocks.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Scan the QR Code printed on the ruler to view a video demonstration of these features.
Total Size - 18-1/2in x 18-1/2in
Creative Grids® products are made in the USA
