Janome ML644D Overlocker
The MyLock 644D includes essential features for simple overlocking.
The differential feed system of two feed dogs virtually eliminates puckered edges on woven fabrics and stretched edges on knits.
Its unique rolled hem conversion feature eliminates the need to change the needle plate, foot, or tension setting for rolled hemming.
Janome has restructured the lower looper guides for easy access. Colour-coded guides are easy to follow for 2, 3, or 4 thread overlocking.
All of the features on this machine are specially designed to make this overlocker the easiest to use on the market today.
Features
- 2, 3, or 4 thread overlock
- Lay-in thread tension dialSeam width: 1 – 5mm seam length3.3mm (narrow), 7.5mm (wide) 2.0mm Rolled hem
- Slim foot
- Handy needle threader
- Convenient thread cutter
- Easy rolled hem change-over
- 0.5 – 2.2 differential feed ratio
- Easy upper knife release
- Adjustable cutting width: 3.1 – 5.1mm
- Easy lower looper threading
- Differential feed
- Lower looper pre-tension setting slider
- Changeable thread guide
- Front and back needle guard
- Retractable upper knife
- Numbered tension dials
- Colour-coded thread guides
- Snap-on presser feet
- Overlocker
- Sewing speed 1,300 SPM
- Weight 8Kg
Standard Accessories
- Screwdriver (Large)
- Screwdriver (Small)
- Tweezers
- Set of needles No.11, No.14
- Nets x 4
- Spool holder caps x 4
- Lint brush
- Needle threader
- Oil
- Spreader for 2 thread
- Spanner
- Spare Upper knife
- Needle threader
- Waste chip box
- Accessory box
- Instruction Book
- Instructional DVD
- Foot Control
....
The MW3018 Limited Edition comes with the features you need for great sewing. Priced affordably, it’s the perfect machine for the returning or beginning sewist. The absolute workhorse of the range. In the lid of the machine is a Quick Reference Chart listing all stitches. Also listed for each stitch is the recommended stitch length and width, the recommended foot to use and the stitch application.
This mechanical machine is built to last with aluminium outer casing (This is very rear in modern machines), the foot control is speed adjustable and the machine features LED lighting a 1 step button hole plus stretch stitches. The machine has a great motor and is one of our staff top picks for a reliable mechanical sewing machine.
Features
Work Space: 170mm (6.7") x 110mm (4.3")
Sewing Speed: up to 800 stitches per minute
Machine Screen: Has red indicator showing selected stitch
Built-in Stitches: 18
Stitch Width: 6.5mm
Buttonholes: 1-step
Needle Positions: via stitch width slider
Foot Pressure: Yes
Needle Threader: Yes
Lighting: Yes
Standard Sewing Feet: 7
Weight: 8.3Kg
Free Arm Length: 90mm from needle
Quick Reference Stitch Chart: Yes in machine lid
Stitch Length: up to 4mm
Bobbin Winder: Yes
Fonts in Normal Sew: No
Drop Feed: Yes
Superior Plus Feed System: Yes
Needle Plate: has patented needle plate markings for precision sewing with needle drop position, angle marks and sewing guides in front of the sewing foot
Thread Cutter: on face plate
Reverse Button: Yes
Carry Handle: long handle folds neatly on top of machine
Internal Frame: rigid die-cast aluminium frame
Included Accessories:
- Zigzag Foot A
- Overedge Foot C
- Hemmer Foot D
- Zipper Foot E
- Satin Stitch Foot F
- Blind Hemming Foot G
- Automatic Buttonhole Foot R
- Quilting Guige Bar
- Janome Plastic Bobbins x 4
- Needle Set
- Additional Spool Pin
- Felt
- Screwdriver (lge)
- Screwdriver (sml)
- Lint Brush
- Seam Ripper
- Spool Holder (large)
- Spool Holder (small)
- Foot Control
- Instruction Book
- Hard Machine Cover
Warranty
- 1 Years of Mechanical Warranty
- 5 Years of Electrical Warranty
....
Janome Open Toe Darning Foot
7mm Max Stitch Width
It's suitable for use with these Janome sewing machines: DC2050, S3, 4300QDC, DM7200, DC6050, 780DC, 740DC, DC3200, DC2200, DC2030
If your machine is not listed above, please ask us and we can help to find the right foot for you
Janome Open Toe Walking Foot - 7mm Low Shank - 200339007
The even feed foot, sometimes referred to as the walking foot, is designed with a set of feed dogs (teeth) which allow the fabric to feed without shifting and eliminates the problem of the under layer of fabric coming up short. The even feed foot is also great for topstitching which can be spoilt due to irregularity of stitching. This is often caused by the bulk created with the seam allowance especially around collars and reveres. Using the walking foot for topstitching will eliminate this problem and give perfect stitching every time. Also includes quilting guide.
The 7mm Walking Foot will fit Low Shank Machines with 7mm Stitch Width
Janome Open-toe Satin Stitch Foot F2
For 7mm - T/Loading
Product code: 200137003
Janome Optic Magnifier Set (20,40 & 60 Strength)
When you need to get a closer view, attach the magnifier to make it easy to see the tiniest detail under the needle. Useful when threading, adjusting the position of the fabric, and carrying out detailed work. Attaches to machine face plate magnifying the needle area for perfect stitch placement.
Fits these Janome machines: MC14000, MC9400QCP, MC8900QCP, MC8200QCP, MC8200QC, Skyline Series (S9,S7,S6, S5, S3), DM7200, DC6100, DC6050, 4300QDC, MC9450QCP
Janome Optic Magnifiers Set
When you need to get a closer view, attach the magnifier to make it easy to see the tiniest detail under the needle. Useful when threading, adjusting the position of the fabric, and carrying out detailed work. Attaches to machine face plate magnifying the needle area for perfect stitch placement.
Fits these Janome machines: Continental M7
Janome Overlock Foot
7mm Max Stitch Width
Suitable for Janome machines witha 7mm max stitch width
Janome Overlocker - Blind Stitch Foot - My Lock - 200203104
Janome Overlocker Carry Bag - Cube Design
Measurements: L 35cm x W 32cm x H 35cm
( Fits up to a Janome AT2000D Overlocker )
Janome Overlocker Gathering Foot - My Lock - 200248101
Janome Blue Plastic Bobbins - 25 Pack In Case
These bobbins fit these Janome machines (except the 1600 series and the MB-4): RE1306, JR1012, 709, 721, 725S, MW3018LE, MS5027LE, DC1030, DC2050, DC2150, DC2200, 740DC, 780DC, DC6050, DC6030, DM7200, 4120QDC, 4300QDC, SKYLINE S3, SKYLINE S6, SKYLINE S7, MC6700P, MC8200QC, MC9450QCP, CM7P, MC400E, MC500E, MC550E, MC9850, SKYLINE S9, MC15000.
Replace any bobbin that is worn, cracked or nicked: a damaged bobbin can cause sewing problems.
If your Janome machine is not included in the above list please contact us and we will let you know if this foot will work with your machine.
