Janome Darning Foot
It's suitable for use with these Janome sewing machines: DC2050, 709, 721, 725S, MW3018, MS5027, DC1030, DC2150, DC6050, 740DC, 780DC, DM7200, 4300QDC, S3
If your machine is not listed above, please ask us and we can help to find the right foot for you
Janome Darning Foot - 5mm
Part No. 200127000
The Darning Foot is used to both mend over holes and tears, and to perform decorative stitching by way of Free Motion. Attach the darning foot to the presser bar with the lever positioned over the needle clamp screw. Drop your machine’s feed dogs, or if not an available function, use a darning plate to disable them. Place fabric, ideally secured into an embroidery hoop. Lower the foot and sew at a low speed, moving the fabric back and forth, and alternate to 90 degrees to secure over tears, or manoeuvre over a drawn design.
It's suitable for use with these Janome sewing machines: DC1030, JR1012, RE1306, 721, 709, 725S
Janome DC2030 Sewing Machine
The Janome DC2030 is a computerised sewing machine with 30 built-in stitches including 1 memory buttonhole.
On the front of the machine is a stitch reference guide, which displays an image of each stitch.
This selection of stitches allows you to be creative using a variety of sewing techniques.
Functions included on this model are built-in needle threader, needle up/down button, reverse button and a one-hand thread cutter.
Also, there is convenient storage in an accessory box.
BONUS accessories have been packaged in the machine carton to enhance your sewing pleasure. These extras are a large extension table, 1/4 inch seam foot and an even feed foot.
Features
- 30 Built-in stitches
- Memory buttonhole
- Max.sewing speed up to 820 stitches per minute
- Speed control slider
- 4 Standard Feet - ZigZag, Zipper, Satin Stitch & Buttonhole
- LED Display
- LED Light
- Extra high lift on presser foot lifter
- Auto-lock off stitch button
- Soft machine cover
- Built-in needle threader
- Drop feed
- Start/stop button
- Needle up/down button
- Lightweight 5kg
Additional Information
- Machine Size - W385 x H282 x D150mm
- Weight - 5.0Kg
- Work Space - 158.5mm (6.2")
- Sewing Speed - up to 820 stitches per minute
- Machine Screen - 2 Digit LED Display
- Built-in Stitches - 30
- Buttonholes - Memory Buttonhole
- Foot Control - Yes
- Foot Pressure - No
- Needle Threader - Yes
- Lighting - White LED light
- Standard Sewing Feet - 4 + 2 BONUS Feet
- Extra Wide Table - Yes, half size
- Quick Reference Stitch Chart - Yes on machine front
- Stitch Length - Up to 4mm
- Speed Control Slide - Yes
- Bobbin Winder - Yes
- Drop Feed - Yes
- Superior Plus Feed System - 4 piece feed dog
- Thread Cutter - On face plate
- Reverse Button - Yes
- Storage - Yes – in accessory box
- Needle Up/Down Function - Yes – without memory function
- Carry Handle - Folding short handle on top of machine
- Internal Frame - Rigid die-cast aluminium frame
- Auto Lock-off Stitch button - Locks off your stitching at the push of button
- Needle Plate - Has patented needle plate markings for precision sewing with needle drop position.
- Stop/Start Button - Can sew without foot control. Hold button when start sewing & machine sews slow, same at end of sewing press & hold button & machine will sew slow
Standard Accessories
- Zigzag Foot A
- Zipper Foot E
- Satin Stitch Foot F
- Buttonhole Foot J (sliding 5mm)
- Janome Plastic Bobbins x 3
- Needle Set (3 x #14 sharp)
- Additional Spool Pin
- Screwdriver
- Lint Brush
- Seam Ripper
- Spool Holder (large)
- Spool Holder (small)
- Foot Control
- Power Cable
- Instruction Book
- Machine Dust Cover
- BONUS Large Extension Table (packaged with machine)
- BONUS 1/4 Inch Seam Foot (packaged with machine)
- BONUS Even Feed Foot (packaged with machine)
* Please note it is not abnormal that a faint humming or high pitch sound comes out from inside these machines.
....
Featuring 50 built in stitches with 3 buttonhole styles, LCD display, 7 piece feed dog and clear stitch reference guide. Plus it comes with a convenient storage compartment. There is a built-in needle threader and the DC2150 has easy functionality with the start/stop button, needle up/down button, reverse button, speed control slide and one-hand thread cutter.
Features:
Work Space - 170mm (6.7") x 110mm (4.3")
Sewing Speed - Up to 700 stitches per minute
Built-in Stitches - 50
Stitch Width - 7mm
1-Step Buttonholes - 3
Needle Threader - Yes
Lighting - LED light
Machine Size - W406 x H298 x D174mm
Weight - 5.4Kg
Stitch Length - up to 5mm
Standard Accessories:
- Zigzag Foot A
- Zipper Foot E
- Satin Stitch Foot F
- Automatic Buttonhole Foot R
- Janome Plastic Bobbins x 4
- Needle Set
- Additional Spool Pin
- Felt
- Screwdriver
- Lint Brush
- Seam Ripper
- Spool Holder (large)
- Spool Holder (small)
- Spool Supporter
- Foot Control
- Power Cable
- Instruction Book
- Hard Machine Cover
....
The Janome DC6050 is an easy to use, fully computerised sewing machine and yet it is packed with so many features. Direct stitch selection keys of your everyday stitches plus 3 one-step buttonholes. The LCD screen shows selected stitch, recommended foot, plus the default stitch width and stitch length which can be changed to suit your requirements. It offers a great range of stitches for all types of sewing and 6 levels of foot pressure enabling you to sew the sheerest of fabrics to heavy weight denim.
Features
- Work Space: 170mm (6.7") x 110mm (4.3")
- Sewing Speed: up to 820 stitches per minute
- Machine Screen: LCD screen with backlight
- Built-in Stitches: 50
- Stitch Width: 7mm
- Buttonholes: 3
- Needle Positions: Various
- Foot Pressure: Yes
- Needle Threader: Yes
- Lighting: White LED light
- Standard Sewing Feet: 7
- Extra Wide Table: Yes, half size
- Built-in Memory: Limited
- Machine Size: W406 x H302 x D176mm
- Weight: 6.4Kg
- Free Arm Length: 90mm from needle
- Quick Reference Stitch Chart: Yes, on machine front
- Stitch Length: up to 5mm
- Speed Control Slide: Yes
- Bobbin Winder: Yes
- Drop Feed: Yes
- Superior Plus Feed System: 7 piece feed dog
- Needle Plate: has patented needle plate markings for precision sewing
- Thread Cutter: automatic thread cutter
- Stop/Start Button: can sew without foot control.
- Needle Up/Down Function: Yes
- Auto Lock-off Stitch button: locks off your stitching at the push of button
- Reverse Button: Yes
- Magnifier: Optional, set of 3 AcuView magnifiers™ (1.2, 1.4, 1.6 lens)
- Storage: accessory box
- Carry Handle: short handle slots neatly into top of machine
- Foot Control: Yes
- Internal Frame: rigid die-cast aluminium frame
Accessories
- Zigzag Foot A
- Overedge Foot C
- Zipper Foot E
- Satin Stitch Foot F
- Blind Hemming Foot G
- 1/4藵 Seam Foot O
- Automatic Buttonhole Foot R
- Stabilizer Plate for B/hole Ft
- Hard Machine Cover
Warranty
- 1 Years of Mechanical Warranty
- 5 Years of Electrical Warranty
....
or finance from $8.67 per week
Janome Ditch Quilting Foot For 9mm Width Machines
Fits these Janome sewing machines: CM7, Skyline Series, 6700, 9450, 8200
If your machine is not listed above, please ask us and we can help to find the right foot for you
Janome Domestic Ball Point Needles 75/11 - HA15X1SP
** Janome Overlockers only use these needles. **
Designed for knit fabrics and Janome 3/4 thread Overlockers.
Similar to a universal needle, but has rounded edges and is not tapered the same way. Intended for closely knit fabrics where the rounded tip will push the weave out of the way rather than cut through it.
Janome Overlockers only use these needles.
Compatible with: ML544D, ML644D, ML744D, AT2000D, 8004D
*Please ask if your model is not listed above
Janome Domestic Ball Point Needles 80/12 - HA15X1SP
Designed for knit fabrics and Janome 3/4 thread Overlockers.
Similar to a universal needle, but has rounded edges and is not tapered the same way. Intended for closely knit fabrics where the rounded tip will push the weave out of the way rather than cut through it.
Janome Overlockers only use these needles.
Compatible with: ML544D, ML644D, ML744D, AT2000D, 8004D
*Please ask if your model is not listed above
Janome Domestic Ball Point Needles 90/14 - HA15X1SP
** Janome Overlockers only use these needles. **
Designed for knit fabrics and Janome 3/4 thread Overlockers.
Similar to a universal needle, but has rounded edges and is not tapered the same way. Intended for closely knit fabrics where the rounded tip will push the weave out of the way rather than cut through it.
Janome Overlockers only use these needles.
Compatible with: ML544D, ML644D, ML744D, AT2000D, 8004D
*Please ask if your model is not listed above
Janome Domestic Ball Point Needles Mixed - HA15X1SP
Designed for knit fabrics and Janome 3/4 thread Overlockers.
Similar to a universal needle, but has rounded edges and is not tapered the same way. Intended for closely knit fabrics where the rounded tip will push the weave out of the way rather than cut through it.
Pack includes 1x 9, 1x 11 & 3x 14
Janome Overlockers only use these needles.
Compatible with: ML544D, ML644D, ML744D, AT2000D, 8004D
*Please ask if your model is not listed above
Janome Elastic Gathering Attachment – Narrow (Type 2)
Fits these Janome machines: CoverPro 2000CPX
