The two pin spool stand attaches easily to the handle of your machine. When using multiple colors of embroidery thread it makes for trouble-free embroidery, as it allows you to set out your colors as you sew.
This accessory works with the following models:
Horizon Memory Craft 12000, Horizon Memory Craft 14000, Horizon Memory Craft 15000 V2, Horizon Memory Craft 9400QCP, Horizon Memory Craft 9450QCP, Horizon Quilt Maker Memory Craft 15000, Horizon Quilt Maker Memory Craft 15000, MC 200EMemory Craft 400E, Memory Craft 500E, Memory Craft 6650, Memory Craft 9850, Memory Craft 9900, Skyline S3, S5, S6, S7, S9
The five pin spool stand attaches easily to the handle of your machine. When using multiple colors of embroidery thread it makes for trouble-free embroidery, as it allows you to set out your colors as you sew.
This accessory works with the following models:
Horizon Memory Craft 12000, Horizon Memory Craft 14000, Horizon Memory Craft 15000 V2, Horizon Memory Craft 9400QCP, Horizon Memory Craft 9450QCP, Horizon Quilt Maker Memory Craft 15000, Horizon Quilt Maker Memory Craft 15000, MC 200EMemory Craft 400E, Memory Craft 500E, Memory Craft 6650, Memory Craft 9850, Memory Craft 9900, Skyline S3, S5, S6, S7, S9
Janome Straight Stitch Foot - 7mm T/L - 200331009
For 7mm stitch width, Top loading bobbin machines
Janome Straight Stitch Foot - 202083009
Fits these Janome machines: MC8200
Janome Tape Binder Set for CoverPro (32mm/8mm) with foot & base plate
Janome Tape Binder Set for CoverPro (42mm/12mm) with foot & base plate
Janome Taping Guide Foot - 7mm
Part no. 202311009
This taping guide foot is used for attaching pre-folded tape to the edge of fabric. . The guide can be adjusted to set the needle drop position to suit the width of the tape. Tape width up to 20mm can be used.
The Janome Taping Guide Foot will fit the following Janome sewing machine models:
6019QC, 6025QC, 6260QC, CS995, DC2050, DC2101, DC2200, DC3050, DC3200, DC4030, DC6030, DC6050, DC7060, DC7100, DM7200, 2160DC, 740DC, 780DC, 3160QDC, 4120QDC, 4300QDC, MC3000, MC3500, MC4000, MC4800, MC4800QC, MC4900QC, MC5200, MC5500, MC6000, MC6500P, MS5027LE, MW3018 (My Excel 18W), MW3018LE, Sewist 625E, 4618, 4618QC, 5027, 5124, 652, 653, 654, 655, 655R (150), 659, MS2028, MS2522 , MX3123, Skyline S3.
Janome Taping Guide Foot 9mm
Part No. 202310008
The Janome Taping Guide Foot for 9mm Janome machine Models is your solution to attaching tape and binding to your garments and quilts. Use the Janome Taping Guide Foot for 9mm Models with all Janome snap on 9mm models. The Janome Taping Guide Foot for 9mm Models works with tape from 5mm-20mm wide and can be used with both single fold bias tape and double fold bias tape. You can adjust the Janome Taping Guide Foot for 9mm Models to fit with width of your tape with just the turn of a screw.
Fits these Janome sewing machines: CM7
If your machine is not listed above, please ask us and we can help to find the right foot for you
Janome Ultra Glide Foot / Teflon
It's suitable for use with these Janome sewing machines: DC2050, MC6600P, 709, 721, 725S, MW3018, MS5027, DC1030, DC2150, DC6050, 740DC, 780DC, DM7200, 4300QDC, S3
If your machine is not listed above, please ask us and we can help to find the right foot for you