Janome ML744D Overlocker

Janome’s entry level computerised model. Featuring 30 built-in stitches with memory buttonhole. The LCD Display shows the number of the selected stitch, plus you can adjust the stitch width and length overriding the default stitch settings. A built-in needle threader makes threading a breeze. This machine is great if you have limited sewing space, you can sew without the foot control, by using the Start/Stop button and the Speed Control Slide to control the sewing speed. Makes a great machine to take for classes or for a beginner sewist.

Features
- Work Space: 158.5mm (6.2")
- Sewing Speed: up to 820 stitches per minute
- Machine Screen: LCD Display
- Built-in Stitches: 30
- Buttonholes: Memory Buttonhole
- Needle Threader: Yes
- Lighting: LED light
- Standard Sewing Feet: 4
- Machine Size: W385 x H282 x D150mm
- Weight: 5.0Kg
- Quick Reference Stitch Chart: Yes on machine front
- Stitch Length: Up to 4mm
- Stitch Width: Up to 5mm
- Speed Control Slide: Yes
- Bobbin Winder: Yes
- Drop Feed: Yes
- Superior Plus Feed System: 5 piece feed dog
- Needle Plate: Has patented needle plate markings for precision sewing with needle drop position.
- Thread Cutter: On face plate
- Stop/Start Button: Can sew without foot control.
- Needle Up/Down Function: Yes – without memory function
- Auto Lock-off Stitch button: Locks off your stitching at the push of button
- Reverse Button: Yes
- Storage: Yes – in accessory box
- Carry Handle: Folding short handle on top of machine
- Foot Control: Yes
- Internal Frame: Rigid die-cast aluminum frame

Accessories
- Zigzag Foot A
- Zipper Foot E
- Satin Stitch Foot F
- Sliding Buttonhole Foot J (5mm width)
- Janome Plastic Bobbins x 3
- Needle Set
- Spool Pin
- Additional Spool Pin
- Screwdriver – Flat
- Lint Brush – Sml
- Seam Ripper
- Spool Holder (large)
- Spool Holder (small)
- Foot Control
- Power Cord
- Instruction Book
- Dust Cover

Warranty
- 1 Years of Mechanical Warranty
- 5 Years of Electrical Warranty

Janome’s entry Level Computerised model. Featuring 50 built in stitches with 3 Buttonhole styles. LCD Display. 7 Piece feed dog and clear stitch reference guide. Plus convenient storage compartment. Built in needle threader. Needle up and down and reverse buttons and one hand thread cutter.

Features
Work Space: 170mm (6.7") x 110mm (4.3")
Sewing Speed: up to 700 stitches per minute
Machine Screen: LCD screen with backlight
Built-in Stitches: 50
Stitch Width: 7mm
Buttonholes: 3
Needle Positions: Various
Needle Threader: Yes
Lighting: LED light
Standard Sewing Feet: 4
Extra Wide Table: Optional
Machine Size: W406 x H298 x D174mm
Weight: 5.4Kg
Free Arm Length: 90mm from needle
Quick Reference Stitch Chart: Yes on machine front
Stitch Length: up to 5mm
Speed Control Slide: Yes
Bobbin Winder: Yes
Drop Feed: Yes
Superior Plus Feed System: 7 piece feed dog
Needle Plate: has patented needle plate markings for precision sewing with needle drop position, angle marks and sewing guides in front of the sewing foot
Thread Cutter: on face plate
Stop/Start Button: can sew without foot control. Hold button when start sewing & machine sews slow, same at end of sewing press & hold button & machine will sew slow
Needle Up/Down Function: Yes
Auto Lock-off Stitch button: locks off your stitching at the push of button
Reverse Button: Yes
Storage: accessory box
Carry Handle: short handle slots neatly into the top of machine
Foot Control: Yes
Internal Frame: rigid die-cast aluminium frame

Warranty
- 1 Years of Mechanical Warranty
- 5 Years of Electrical Warranty

Accessories
- Zigzag Foot A
- Zipper Foot E
- Satin Stitch Foot F
- Automatic Buttonhole Foot R
- Janome Plastic Bobbins x 4
- Needle Set
- Additional Spool Pin
- Felt
- Screwdriver
- Lint Brush
- Seam Ripper
- Spool Holder (small)
- Spool Holder (large)
- Spool Supporter
- Foot Control
- Power Cable
- Instruction Book
- Soft Machine Cover

....

We have 1x JR1012 with damaged box, the machine itself has been tested and is fine and come with a full warranty.

The Janome JR1012 Sewing machine is jammed packed with 58 stitch functions from 13 built-in stitches including a 4-step buttonhole. This front bobbin loading machine has denim sewing capabilities so is perfect for those mending and alterations jobs but can also create sewing projects right from their beginning.

Features
- Work Space: 170mm (6.7") x 110mm (4.3")
- Sewing Speed: Up to 860 stitches per minute
- Machine Screen: No screen, has stitch selector dial
- Built-in Stitches: 13
- Stitch Width: Up to 5mm
- Buttonholes : 4-step
- Needle Positions: Pre-set per stitch
- Lighting: Yes
- Standard Sewing Feet: 2
- Weight: 6Kg
- Free Arm Length: 80mm from needle
- Quick Reference Stitch Chart: Yes on machine front
- Stitch Length: Up to 4mm
- Bobbin Winder: Yes
- Superior Plus Feed System: 4 piece feed dog
- Needle Plate: Has markings for precision sewing
- Storage: Accessory box
- Carry Handle: Short handle slots neatly into top of machine
- Foot Control: Yes
- Internal Frame: Rigid die-cast aluminium frame

Accessories
- Zigzag Foot A
- Buttonhole Foot B
- Janome Plastic Bobbins x 2
- Needle Set
- Seam Ripper
- Darning Plate
- Foot Control
- Instruction Book

Warranty
- 1 Years of Mechanical Warranty
- 5 Years of Electrical Warranty

Includes $246 worth of accessories!

Blind Stitch foot $59.00
Cording foot $59.00
Gathering Attachment $39.00
Elastic Gathering Attachment $59.00
Overlockers Creative Sewing Guide $30.00

Total = $246.00

A Janome overlocker is the perfect companion machine for your Janome sewing machine. Sew your dressmaking projects quickly with a professional finish. Hemming is never easier with rolled hem or blind hem. Seaming is fast and efficient using 4 threads adjusting your stitch length and width to suit your fabric. This model overlocker has 4 bonus feet/attachments packaged in with the overlocker.

Features
- Number of Threads: 4
- Overlock Stitch: Using 3 or 4 threads
- Flatlocking: Yes
- Rolled Hemming: Yes
- Threading Chart: Yes
- Colour Coded Thread Guides: Yes
- Type of Tension: Manual dials
- Tension Release: No, manually turn dials to 0
- Sewing Speed: Up to 1300 stitches per minute
- Adjustable Stitch Length: 1mm to 4mm
- Adjustable Cutting Width: 3.1mm to 7.3mm
- Differential Feed Ratio: 0.5mm to 2.25mm
- Adjustable Foot Pressure: Yes
- Needle System: Janome Ballpoint HAx1SP
- Machine Weight: 8Kg
- Quick change to rolled hem: Yes
- Retractable Upper Knife: Yes
- Thread Cutter: Yes, on face plate
- Foot Control: Yes
- Carry Handle: Yes
- Instructional DVD: Yes

Included Accessories
- Presser Foot (on machine)
- Pack of needles (HAx1SP)
- Spool Holders x 4
- Screwdriver (Lge)
- Screwdriver (Sml)
- Tweezers
- Blind Stitch Foot (Bonus)
- Gathering Attachment (Bonus)
- Elastic Gathering Attachment (Bonus)
- Cording Foot (Bonus)
- Foot Control
- Instruction Book
- Instructional DVD

Warranty
- 1 Years of Mechanical Warranty
- 5 Years of Electrical Warranty

A coverstitch machine is essential for the sewist looking to achieve a professional finish. The CoverPro® 2000CPX’s innovative design is based on the marriage of an industrial-style cover hem machine and a convenient home machine. The resulting union has produced a high-speed, long arm, heavy-duty cover hem machine that looks and operates like a sewing machine. With a wide triple cover hem stitch, exclusive free arm configuration, Tension Level Control (TLC) and Janome’s Seam Tightening System™ (STS), the 2000CPX is the most advanced Cover Hem machine.

Features
- Seam Tightening System (STS)
- Free Arm
- 1, 2 or 3 needle
- Quick reference guide for stitch selection
- 1 needle, 2 thread chain stitch
- 2 needle, 3 thread cover stitch
- 3 needle, 4 thread triple cover stitch
- Vertical needle drop
- Tension release device
- Foot pressure adjustment
- Differential feed ratio 0.5 to 2.25
- Stitch length 1 to 4mm
- Stitch width with two needles: 6mm (standard), 3mm (narrow)
- Stitch width with three needles: 6mm (3mm + 3mm)
- Speeds up to 1,000 spm
- Foot pressure adjustment with guide lines
- Extra large bed space 4” x 5.5”
- Tension Level Control (TLC) LED Light
- 4 cones of thread included
- Dust cover included

Accessories
- Presser Foot (on machine)
- Pack of 5 needles (EL x 705)
- Spool Holders x 4
- Screwdriver (Lge)
- Screwdriver (Sml)
- Spool Caps x 4
- Lint Brush
- Tweezers
- Nets x 4
- Needle Threader
- Attachment Screws x 2
- Accessory Box
- Foot Control
- Instruction Book
- Machine Dust Cover

 ....

 or Finance from $7.84 per week

The Air Thread 2000D Professional is our first air thread overlocker and the easiest Janome overlocker to thread. Janome’s push and blow type air threading system is an industry first. When threading the loopers, the thread is blown down the threading channel and through the eye of the looper. The needles are just as easy to thread, using the built-in needle threader which slides left and right, allowing the user to thread the required needle. Sewing speciality fabrics is a breeze, the 8-piece feed dog allows fabric to smoothly feed under the the sewing foot, plus grooves have been added to the sewing foot to help control challenging or slippery fabrics during stitching. The 5-level foot pressure dial is located on the top left of the overlocker. Integrating the stitch length and differential dials makes for easy and perfect adjustment for the fabric being sewn, whether sewing stretch to lightweight woven fabric. Adjusting the cutting width or dropping the upper knife, is all easily accessed in the one place, open the front cover and just the turn of a dial lowers the upper knife, turn again to re-engage. Safety, is important, the overlocker will not operate if, any covers are open, the sewing foot is raised or if the air thread mechanism is engaged. Another industry first is two ball bearing on the main shaft which provide low torque, making this overlocker powerful and stable when operating, even at high speeds. All of these features are specially designed to make this overlocker the easiest to use on the market today.

Features
- One-Push Air Threading System
- 8-Piece Feed Dog System
- Built-in One-step Converter
- Built-in Needle Threader

Accessories
- Overlock Foot (on overlocker)
- Screwdriver (Lge)
- Screwdriver (Sml)
- Double ended spanner
- Tweezers
- Needle Set – Organ HAx1SP (2 x #11, 3 x #14)
- Net x 4
- Spool Holder Cap (Lge) x 4
- Lint Brush
- Oil
- Needle holder / spreader pin
- Spare Upper Knife
- Looper threading wire
- Accessory Box
- Waste Chip Box
- Instruction Book
- Instructional DVD
- Dust Cover
- Foot Control

....

or Finance from $12.54 per week

The Memory Craft 6700P Professional is the first domestic flat-bed sewing machine with a one-step needle plate conversion. It is the fastest domestic machine in its class with a maximum sewing speed of 1,200 stitches per minute. The 255mm (10”) of flat seamless work area is a pleasure to work on, and once the large extension table is attached, the work space is significantly increased. Lighting is no issue, white LED’s are located in 3 areas which illuminates the work space allowing you to sew at your leisure, day or night. An LCD screen along with the large chart reference chart make it so easy to navigate through the 200 built-in stitches, including 9 one-step buttonholes and 2 alpha numeric fonts including 9mm lettering and numbers. You can customise each stitch including buttonholes plus save as a favourite stitch. Plus, this model has customisation of the direct stitch screen, you can replace 7 of the original stitches and replace them with 7 of your favourite or most used stitches, this is a great time saving feature. Quilters and designers will appreciate the AcuFeed™ Flex Layered Fabric Feeding System, and the manual controlled foot pressure which can be adjusted in very small or large increments, to perfecting stitch your chosen fabric.

Key Features:
- 200 Stitches PLUS 5 Alphabets
- Maximum Sewing Speed: 1,200 SPM
- Superior Needle Threader
- One-Push Needle Plate Conversion with 3 Included Plates
- Detachable AcuFeed Flex Layered Fabric Feeding System
- 10" All-Metal Seamless Flatbed
- Professional HP Needle Plate and Foot
- 6 LEDs in 3 Locations
- Memorized Needle Up/Down
- 17 included accessory feet
- Large Extension Table Included
- Detachable Stitch Chart

Standard Accessories:
1/4 Inch Seam Foot O
- AcuFeed Flex™ Dual Feed Holder with AD Foot
- Automatic Buttonhole Foot R with Stabilizer Plate
- Blind Hem Foot G
- Button Sewing Foot
- Buttonhole Foot
- Buttonhole Stabilizer Plate
- Convertible Freemotion Quilting Foot Set
- Darning Foot
- Extra Large Foot Controller
- Free Motion Quilting Holder
- HP Foot
- HP Needle Plate
- Open Toe Satin Stitch Foot
- Overedge Foot M
- Rolled Hem Foot
- Satin Stitch Foot
- Seam Ripper
- Straight Stitch Needle Plate
- Zig-Zag Foot
- Zipper Foot E

....

 or Finance from $21.28 per week

The MyLock 744D with electronic foot control is an advanced overlocker with 2 needles and 2, 3 or 4 thread overlock stitching. The differential feed ratio, which is adjustable from 0.5 to 2.25 provides exceptional control for handling all types of fabrics and for creating desired special effects. Threading is a breeze with colour-coded thread guides and a self-threading lower looper. Simply lay the thread into the guide, flip a switch, and the lower looper is threaded. The guide is automatically returned to its normal position when you turn the balance wheel. The thread tension automatically release when you lift the presser foot so you can draw through the threads smoothly. The MyLock 744D also lets you quickly switch to rolled hemming without changing the needle plate. A lower looper pre-tension stitch eliminates the need to change tension for rolled hems.

Features
- Number of Threads: 4
- Overlock Stitch: Using 2, 3 or 4 threads
- Flatlocking: Yes
- Rolled Hemming: Yes including lower looper pretension slider
- Threading Chart: Yes
- Colour Coded Thread Guides: Yes
- Type of Tension: Manual, lay-in type
- Tension Release: Yes, lift presser foot
- Sewing Speed: up to 1300 stitches per minute
- Adjustable Stitch Length: 1mm to 5mm, shown in window
- Adjustable Cutting Width: 3.1mm to 7.3mm
- Differential Feed Ratio: 0.5mm to 2.25mm, shown in window
- Adjustable Foot Pressure: Yes
- Free Arm: Yes
- Needle System: Janome Ballpoint HAx1SP
- Machine Weight: 8Kg
- Machine Cover: No
- Quick change to rolled hem: Yes
- Retractable Upper Knife: Yes
- Two Thread Converter: Yes
- Thread Cutter: Yes, on face plate
- Accessory Box: Yes
- Waste Tray: Yes
- Foot Control: Yes
- Carry Handle: Yes
- Instructional DVD: Yes

Included Accessories
- Presser Foot (on machine)
- Pack of needles (HAx1SP)
- Spool Holders x 4
- Screwdriver (Lge)
- Screwdriver (Sml)
- Spool Caps x 4
- Lint Brush
- Tweezers
- Spanner
- Nets x 4
- Oil
- Spare Upper Knife
- Needle Threader
- Spreader for 2 thread
- Attachment Mounting Plate
- Lint Catcher
- Accessory Box
- Foot Control
- Instruction Book
- Instructional DVD

Warranty
- 1 Years of Mechanical Warranty
- 5 Years of Electrical Warranty

....

 or finance from $9.67 per week

Janome Adjustable Narrow Zipper Foot

Janome Clear View Foot For 2000 CPX Cover Stitch - 795 818 107

A modern sensibility meets the comforts of convenience. The Skyline S6 includes the features to take your sewing to a new level. A spacious bed provides room for larger quilting and home dec projects while its easy convenience features like Automatic Thread Cutter and Memorized Needle Up/Down will save you time and make your sewing easier. This computerized machine has top of the line features at a mid-level price. Take your sewing to new heights with the Skyline S6.

Features

- 196 Built-In Stitches
- 91 Needle Positions
- Maximum 9mm Stitch Width
- 6 Ultra-Bright LED lights
- Auto Tension System
- Backlit Digital LCD Screen
- Advanced Start/Stop Button
- Automatic Thread Cutter
- Easy Reverse Button
- Locking Stitch Button
- Memorized Needle Up/Down
- One-Step Plate Converter
- AcuFeed Flex Fabric Feeding System

Accessories
- 1/4 Inch Seam Foot O
- AcuFeed Flex™ Dual Feed Holder with AD Foot
- Automatic Buttonhole Foot R with Stabilizer Plate
- Blind Hem Foot G
- Button Sewing Foot
- Buttonhole Stabilizer Plate
- Darning Foot
- Knee Lifter
- Overedge Foot M
- Quilting Guide Bar
- Rolled Hem Foot
- Satin Stitch Foot
- Seam Ripper
- Zig-Zag Foot
- Zipper Foot E

 ....

or finance from $15.10 per week

* Plus $200 worth of Free Embroidery Thread plus Thread Stand While Stocks Last!*
- 10x Mixed colours of Coats embroidery thread (Colours will vary from picture) 

The Memory Craft 550E is the latest edition to our Embroidery Only Range and it has the largest embroidery field being 200 x 360mm. Having 4 hoops with the machine it’s easy to personalise, embellish and monogram home décor items, garments and accessories. With 180 built-in embroidery designs and 6 fonts for monogramming, the possibilities are endless. The MC550E has an extra wide table to support large embroidery projects. Threading is so easy with the adding guide above the needle in conjunction with the superior needle threader.

Designs are easily imported via a USB Key and edited through the machine’s advanced on-screen editing functions. Navigation through all of these features has become easier on the MC550E’s LCD colour touch screen. Plus, the machine will automatically power off after a set time.

Key Features:
- Maximum embroidery size: 7.9” x 14.2”
- 180 built-in designs
- 6 fonts for monogramming
- Anti-kink thread guide
- Patent pending hoop levers on RE36b hoop
- 2 and 3 letter monogramming
- Embroidery sewing speed: 400-860 SPM
- Flexible stitch traveling (by units of 1, 10, 100, 500)
- Auto return post thread break
- On-screen editing functions include enlarge/ reduce, rotate, flip, drag and drop, arc, combine, copy and paste, grouping, corner layout, single color sewing, zoom

Standard Accessories:
- Embroidery Foot P
- 5 x Janome Plastic Bobbins
- Needle Set
- Screwdriver (large)
- Screwdriver (flat)
- Lint Brush
- Spool Holder x 2 (large)
- Spool Holder x 2 (small)
- Spool Holder x 2 (special)
- Extra Spool Pin
- Embroidery Scissor
- Touch Panel Stylus
- Bobbin Holder Cleaner
- Embroidery Hoop RE36b (with template) 200x360mm
- Embroidery Hoop SQ20b (with template) 200x200mm
- Embroidery Hoop RE20b (with template) 140x200mm
- Embroidery Hoop SQ14b (with template) 140x140mm
- 8 x Magnetic Clamps (for RE36b hoop)
- Anti-slip Tape (for hoops)
- Bobbin Holder with red dot
- Bobbin Holder with yellow dot
- Key Icon Reference Chart
- Power Cable
- USB Cable
- Instruction Book
- Quick Reference Guide
- Instructional Video DVD
- Embroidery Editor CD-ROM (Windows only)
- Soft Machine Cover
- Extra Wide Table (white)



 

 ....

or Finance from $30.00 per week